Hydrotech 5600 SXT User Programming Chart Manual de usuario Pagina 2

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 10
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 1
Display is CD (CURRENT DAY OF THE WEEK). Press UP/DOWN buttons to adjust the
current day of the week. ONLY AVAILABLE IF DAY OF THE WEEK CONTROL IS
ON IN MASTER PROGRAAMING
Model 5600 SXT- Master Programming Chart
FROM SERVICE MODE:-
To enter master programming mode, set the Time of Day display to 12:01 P.M.
Press and hold and buttons together until the programming icon
replaces the service icon
Display is DF (DISPLAY FORMAT)
Unit of measure for volume and display format for
time [Factory Default Setting: GAL]. Press UP/DOWN buttons to adjust the settings.
Display is VT (VALVE TYPE)
type of valve setting [Factory Setting: St1b (Standard
Downflow/Upflow, Single Backwash]. Press UP/DOWN buttons to adjust the settings.
Display is CT (Control Type)
type of regeneration [Factory Setting: Fd (Meter Delayed)].
Press UP/DOWN buttons to adjust the settings.
Display is NT (Number of Tanks)
[Factory Default Setting: 1]. Do not change the setting.
Display is UNIT CAPACITY
Capacity in grains for softeners and in ppm per gallon for iron
filters. [Factory Default Setting: Refer to User
Manual].
Extra Cycle
Button
Extra Cycle
Button
Extra Cycle
Button
Extra Cycle
Button
Extra Cycle
Button
UP
DOWN
Vista de pagina 1
1 2 3 4 5 6 7 8 9 10

Comentarios a estos manuales

Sin comentarios